Alcatel-Lucent 7450 Configuration Manual page 264

Show, Clear, and Debug Command Reference
Sample Output
*A:Dut-C# show router interface "DUTC_TO_DUTB.1.0" detail
=======================================================================Interface
Table (Router: Base)
=======================================================================
-----------------------------------------------------------------------
Interface
-----------------------------------------------------------------------
If Name
Admin State
Protocols
IP Addr/mask
IGP Inhibit
HoldUp-Time
IPv6 Addr
HoldUp-Time
IP Addr/mask
IGP Inhibit
HoldUp-Time
IPv6 Addr
-----------------------------------------------------------------------
Details
-----------------------------------------------------------------------
Description
264
Table 17: Standard IP Interface Field Descriptions
Label
Interface-Name
Type
IP-Address
Adm
Opr
Mode
Port/SAP Id
: DUTC_TO_DUTB.1.0
: Up
: OSPFv2
: 1.0.23.3/24
: Disabled
: 0
: 3FFE::100:1703/120
: 0
: 51.0.23.3/24
: Disabled
: 0
: FE80::200:FF:FE00:3/64
: (Not Specified)
Description
The IP interface name.
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on the
IP interface.
Sec — The IP address for the IP interface is a secondary address on the
IP interface.
The IP address and subnet mask length of the IP interface.
n/a — Indicates no IP address has been assigned to the IP interface.
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally disabled.
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
The physical network port or the SAP identifier associated with the IP
interface.
Oper (v4/v6)
Address Type
Broadcast Address : Host-ones
Track Srrp Inst
Track Srrp Inst
Address Type
Broadcast Address : Host-ones
Track Srrp Inst
: Up/Up
: Primary
: 0
PREFERRED
: 0
: Secondary
: 0
PREFERRED
Router Configuration Guide