Furuno FAR-3230S(-BB) Installation Manual page 62

2. WIRING
Connection
Note: The cable shield must lie in the cable clamp.
Note: The cable shield must lie in the cable clamp.
2-34
J5 J5 J5
J4 J4 J4
J3 J3 J3
J2 J2 J2
J1 J1 J1
MC1.5-W-L cable MC1.5-W-L cable MC1.5-W-L cable
J6 J6
J4 J4
J5 J5
J2 J2
J3 J3
J1 J1
MPYC-12 MPYC-12
MC1.5-W-L cable MC1.5-W-L cable
MC-3020D/3030D
For TTYCSLA cables, pass
the drain wire through shrink
tubing, then attach these
crimp-on lugs and screws to
connect drain wires to
chassis.
IV-1.25sq. (Local supply) IV-1.25sq. (Local supply) IV-1.25sq. (Local supply)
TTYCS-1/ TTYCS-1/ TTYCS-1/
TTYCSLA-1 TTYCSLA-1 TTYCSLA-1
IV-1.25sq. (Local supply) IV-1.25sq. (Local supply)