207
Description
Selection
Default
Programming
Conditions
Feature References
4-76
System Programming
4.4
First Digit Time
Sets the maximum time allowed between the start of outside dial
tone and the first digit dialled on an outgoing outside call. If an
extension user fails to dial any digits during this time, the DTMF
receiver is released.
Time (seconds): 5 through 120
10 s
1.
Enter 207.
Display: 1st Digit Time
2.
Press NEXT.
Display example: Time: 10
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Section 3, Features,
Toll Restriction
Timer Programming
sec