S Ystem Data Default Set; S Ystem Programming And Diagnosis With Personal Computer - Panasonic KX-TD1232E Installation Manual

3 Features
S
ystem Data Default Set
Description
Conditions
Programming References
Feature References
Operation References
S
ystem Programming and Diagnosis with Personal Computer
Description
This system permits re-initialization of system-programmed data.
If all the programmed data is cleared, the system will restart with
the default setting.
The default setting for each programming item is listed in Section 5.2,
"Default Values."
No programming required.
None
Section 2, Installation,
2.8 System Data Clear
This system can be programmed and administered using a personal
computer. The EIA/Remote Programming & Diagnosis floppy is
required to perform this feature. There are two programming
methods:
On-Site Programming
By connecting a personal computer (PC) to your system, system
programming and maintenance can be performed locally. There are
two ways available to perform the above:
(Method 1.) Using the EIA (RS-232C) port
Connect the PC to the EIA (RS-232C) port provided. The main
unit has an EIA (RS-232C) port which can be used for either
system administration or SMDR.
(Method 2.) Using a modem
Install the optional Remote Card or Unit. Connect the PC to an
extension jack. Assign the floating number of the modem in
system programming. Dial this number from the PC.
S
Features 3-165