Co-To-Tie Transfer - Panasonic KX-TD1232E Installation Manual

System Programming
Description
Selection
Default
Programming
Conditions

CO-to-TIE Transfer

Enables or disables transferring an incoming outside call to the TIE
line on a CO line group basis. This restriction applies to the
following: 1) Call Forwarding to a TIE line 2) Call Transfer to a
TIE line.
• CO line group (TRG) number: 1 through 8,
• Enable / Disable
All CO line groups – Disable
1. Enter 452.
Display : CO-TIE Transfer
2. Press NEXT.
Display: TRK GRP NO?→
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
None
( =all CO line groups)
452
35