Co Line Group Assignment - Panasonic KX-TD1232E Installation Manual

401
Description
Selection
Default
Programming
Conditions
Feature References
4-88 System Programming
4.6 CO Line Programming

CO Line Group Assignment

Each CO line must be assigned to a CO line group. This program
defines the CO line group assignment for each CO line. For
example, if there are multiple telephone service companies available,
the CO lines can be grouped by company.
• CO line (CO) number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 54,
• CO line group (TRG) number: 1 through 8
CO01 – TRG 1; CO05 – TRG 5;
CO02 – TRG 2; CO06 – TRG 6;
CO03 – TRG 3; CO07 – TRG 7;
CO04 – TRG 4; From CO08 – TRG 8
1. Enter 401.
Display : Trunk Group Asn
2. Press NEXT.
Display: CO Line NO?–>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:TRG1
4. Enter the CO line group number.
To change the current entry, enter the new CO line group number.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• CO09 through CO16 of KX-TD816 and CO025 through CO54 of KX-
TD 1232 become available when the expansion unit KX-TD290 is
installed in the main unit.
• To assign all CO lines to one CO line group, press the
In this case, the display shows the contents programmed for CO01.
Section 3, Features,
CO Line Group
( =all CO lines)
( =all CO lines)
key at step 3.