System Programming
Description
Selection
Default
Programming
Conditions
Voice Level (Transmit)
Assigns the transmitted voice level on a CO line port basis. This
program is valid only when the voice path type is set to "4 wire".
• CO line number:
KX-TD816 – 05 through 08,
KX-TD1232 – 09 through 12 (Master), 21 through 24 (Slave),
( =all CO lines)
• –6 db / –3 db / 0 db / +3 db
All CO lines – –3db
1.
Enter 458.
Display: Voice Level (TX)
2.
Press NEXT.
Display: CO Line NO?→
3.
Enter a CO line number.
To enter CO line number 09, you can also press NEXT.
Display example: CO09:–3db
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
Press END.
To assign all CO lines to one selection, press the
458
( =all CO lines)
key in step 3.
41