C All Forwarding - To Co Line - Panasonic KX-TD1232E Installation Manual

3 Features
C
all Forwarding – to CO Line
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
Calls directed to your extension will be sent to an external
destination. The outside telephone number must be pre-
programmed.
• Types of calls which are forwarded by this function are:
Outside calls – DIL 1:1; DDI (ISDN Service only)
Intercom calls – Extension; Transfer
A call between two external parties can be established by this feature
only when both outside lines are ISDN S0 lines.
extension's
• The forwarding
Account Code Entry requirements still apply.
• Class of Service programming determines the extensions that are able to
perform the function.
• If an extension is limited by the program [502] "Extension-to-CO Line
Call Duration Limit" according to its Class of Service, the extension is
unable to forward an outside call to a CO line.
• If a call between an extension and an outside party is established by this
feature, the duration of the call period can be restricted depending on
the setting of a system timer.
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb
[205] Extension-to-CO Line Call Duration Time
[502] Extension-to-CO Line Call Duration Limit
[504] Call Forwarding to CO Line
Station Programming.......................................................User Manual,
Customising the Buttons – FWD/DND Button
Section 3, Features,
Limited Call Duration
Operation – Before Leaving Your Desk
Forwarding Your Calls (Call Forwarding)
Toll Restriction, Least Cost Routing and
Features
C
3-27