S Tation Hunting - Panasonic KX-TD1232E Installation Manual

3 Features
S
tation Hunting
Description
Conditions
Programming References
If a call reaches a floating number of a hunting group, Station
Hunting redirects the incoming call to an idle member of the
hunting group. There are a maximum of 32 hunting groups. Idle
extensions are automatically hunted according to the programmed
type. There are six hunting types available – Circular, UCD
(Uniform Call Distribution), Voice Mail (VM), Automated
Attendant (AA), Ring and No Reply.
Circular hunting: The extensions are hunted until an idle
one is found, regardless of the jack number.
UCD: Refer to "Uniform Call Distribution (UCD)" in this
section.
AA hunting: All of the AA ports are hunted until an idle one
is found to permit AA Service.
VM hunting: All of the VM ports are hunted until an idle
one is found to permit VM Service.
Ring: All of the extensions in the group ring simultaneously.
No Reply hunting: The extensions are hunted in the order of
registration at a programmed "Call Forwarding — No
Answer" time. If the called extension is busy, the call hunts
the following extensions.
One hunting type is selected for each hunting group. The hunting
order corresponds to the order of registration in program [131]. For
VM/AA Hunting, an incoming call to any extension number which
belongs to a hunting group is hunted as well.
Hunting Type
Incoming Call
Arrives at
Floating Extension
Extension which belongs to a
hunting group
• Even if the called extension has set Do Not Disturb, or Call Forwarding,
they are disregarded and the call reaches to the extension.
Section 4, System Programming,
[106] Station Hunting Type
[131] Hunting Group Assignment
Circular VM/ UCD
AA
: A call is hunted.
Features
S
Ring No
Reply
3-155