211
Description
Selection
Default
Programming
Conditions
Feature References
4-80
System Programming
4.4
Dial Start Time
Sets the number of milliseconds the system waits before dialling
after a CO line is seized.
Time (milliseconds): 0 through 40 ( 100 is the actual time)
0 ms
1.
Enter 211.
Display: CO Dial Start
2.
Press NEXT.
Display example: Time: 000 msec
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
• You enter a number from 0 through 40. The actual time is a 100 times
your input.
• You cannot leave the entry empty.
Section 3, Features,
Line Access, Automatic
Line Access, CO Line Group
Line Access, Direct
Line Access, Individual
Timer Programming