Night Service Access - Panasonic KX-TD1232E Installation Manual

513
Description
Selection
Default
Programming
Conditions
Feature References
4-122 System Programming
4.7

Night Service Access

Enables or disables the ability to switch the Day/Night service on a
Class of Service (COS) basis.
• COS number: 1 through 8,
• Enable / Disable
All COS – Enable
1. Enter 513.
Display: Night Service
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• The operator extension can switch the mode regardless of setting.
Section 3, Features,
Night Service
COS Programming
( =all COS)
key at step 3. In this