Co Line Programming; Co Line Connection Assignment - Panasonic KX-TD1232E Installation Manual

4.6

CO Line Programming

Description
Selection
Default
Programming
Conditions
Feature References

CO Line Connection Assignment

Used to identify the CO lines which are connected to the system(s).
This prevents users from originating a call to a line which is not
connected.
• CO line number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 54,
• Connect / No Connect
All CO lines – Connect
1. Enter 400.
Display: CO Connection
2. Press NEXT.
Display: CO Line NO?→
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Connect
4. Keep pressing SELECT until the desired selection is displayed.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• CO09 through CO16 of KX-TD816 and CO025 through CO54 of KX-
TD1232 become available when the expansion unit KX-TD290 is
installed in the main unit. However, CO09 through CO16 or CO09
through CO54 of the maximum number of B channels which are
assigned in the program [450] "PRI Configuration" can be set to
"Connect." We recommend to set the required number of B channel to
"Connect."
• To assign all CO lines to one selection, press the
this case, the display shows the contents programmed for CO01.
Section 3, Features,
CO Line Connection Assignment
( =all CO lines)
( =all CO lines)
key in step 3. In
System Programming
400
4-87