Do Not Disturb Override - Panasonic KX-TD1232E Installation Manual

507
Description
Selection
Default
Programming
Conditions
Feature References
4-118 System Programming
4.7

Do Not Disturb Override

This program determines which Classes of Services (COS) are
allowed to perform Do Not Disturb (DND) Override.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1. Enter 507.
Display: DND Override
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features,
Do Not Disturb (DND) Override
COS Programming
( =all COS)
key at step 3. In this