Envelope Feed Delay; Auto Envelope Eject - Pitney Bowes ADDRESSRIGHT DA300 Operator's Manual

Appendix A • Control Panel Menus
8. Envelope Feed
Delay
9. Auto Envelope
Eject
DA300 Printer Operator Guide
Use this option to feed very glossy material or if extra
ink drying time is needed. This option slightly reduces
the overall throughput of the printer.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until 8. ENV. FEED DELAY appears on
the LCD panel.
2. Press the Enter button to select this option.
The time delay (0.0 to 30.0 seconds, in tenth second
increments) can be adjusted by pressing the +
button (MORE) or – button (LESS).
3. When you've finished making selections, press the
Menu button to back out of the menu until the printer
displays OFF LINE. Then, press the On Line Button
to enable the printer.
Use this option to automatically eject the last envelope
in your job.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until 9. AUTO ENVELOPE EJECT
appears on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + button (ON) or the - button (OFF).
4. Press the Menu button to back out of the menu until
the printer displays "OFF LINE". Then, press the On
Line Button to enable the printer.
A-28