Dell S4048–ON Configuration Manual page 419

• QSFP port 0 is connected to a QSA with SFP+ optical cables plugged in.
• QSFP port 4 is connected to a QSA with SFP optical cables plugged in.
• QSFP port 8 in fanned-out mode is plugged in with QSFP optical cables.
• QSFP port 12 in 40 G mode is plugged in with QSFP optical cables.
For these configurations, the following examples show the command output that the show interfaces tengigbitethernet
transceiver, show interfaces tengigbitethernet, and show inventory media commands displays:
Dell#show interfaces tengigabitethernet 1/40 transceiver
SFP+ 1 Serial ID Base Fields
SFP+ 1 Id
SFP+ 1 Ext Id
SFP+ 1 Connector
SFP+ 1 Transceiver Code
SFP+ 1 Encoding
..................
..................
SFP+ 1 Diagnostic Information
===================================
SFP+ 1 Rx Power measurement type
===================================
SFP+ 1 Temp High Alarm threshold
SFP+ 1 Voltage High Alarm threshold
SFP+ 1 Bias High Alarm threshold
NOTE: In the following show interfaces tengigbitethernet commands, the ports 1,2, and 3 are inactive and no physical
SFP or SFP+ connection actually exists on these ports. However, Dell Networking OS still perceives these ports as valid and the
output shows that pluggable media (optical cables) is inserted into these ports. This is a software limitation for this release.
Dell#show interfaces tengigabitethernet 1/1 transceiver
SFP+ 1 Serial ID Base Fields
SFP+ 1 Id
SFP+ 1 Ext Id
SFP+ 1 Connector
............................
Dell#show interfaces tengigabitethernet 1/2 transceiver
SFP+ 1 Serial ID Base Fields
SFP+ 1 Id
SFP+ 1 Ext Id
SFP+ 1 Connector
............................
Dell#show interfaces tengigabitethernet 1/3 transceiver
SFP+ 1 Serial ID Base Fields
SFP+ 1 Id
SFP+ 1 Ext Id
SFP+ 1 Connector
............................
Dell#show interfaces tengigabitethernet 1/4 transceiver
SFP 1 Serial ID Base Fields
SFP 1 Id
SFP 1 Ext Id
SFP 1 Connector
SFP 1 Transceiver Code
SFP 1 Encoding
..................
..................
SFP 1 Diagnostic Information
===================================
SFP 1 Rx Power measurement type
===================================
SFP 1 Temp High Alarm threshold
= 0x0d
= 0x00
= 0x23
= 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00
= 0x00
= OMA
= 0.000C
= 0.000V
= 0.000mA
= 0x0d
= 0x00
= 0x23
= 0x0d
= 0x00
= 0x23
= 0x0d
= 0x00
= 0x23
= 0x0d
= 0x00
= 0x23
= 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x00
= 0x00
= OMA
= 0.000C
Interfaces 419