Dell S4048–ON Configuration Manual page 662

• Disable OSPFv3 graceful-restart.
CONF-IPV6-ROUTER-OSPF mode
no graceful-restart grace-period
Displaying Graceful Restart
To display information on the use and configuration of OSPFv3 graceful restart, enter any of the following commands.
• Display the graceful-restart configuration for OSPFv2 and OSPFv3 (shown in the following example).
EXEC Privilege mode
show run ospf
• Display the Type-11 Grace LSAs sent and received on an OSPFv3 router (shown in the following example).
EXEC Privilege mode
show ipv6 ospf database grace-lsa
• Display the currently configured OSPFv3 parameters for graceful restart (shown in the following example).
EXEC Privilege mode
show ipv6 ospf database database-summary
Examples of the Graceful Restart show Commands
The following example shows the show run ospf command.
Dell#show run ospf
!
router ospf 1
router-id 200.1.1.1
log-adjacency-changes
graceful-restart grace-period 180
network 20.1.1.0/24 area 0
network 30.1.1.0/24 area 0
!
ipv6 router ospf 1
log-adjacency-changes
graceful-restart grace-period 180
The following example shows the show ipv6 ospf database database-summary command.
Dell#show ipv6 ospf database database-summary
!
OSPFv3 Router with ID (200.1.1.1) (Process ID 1)
Process 1 database summary
Type
Oper Status
Admin Status
Area Bdr Rtr Status
AS Bdr Rtr Status
AS Scope LSA Count
AS Scope LSA Cksum sum
Originate New LSAS
Rx New LSAS
Ext LSA Count
Rte Max Eq Cost Paths
GR grace-period
GR mode
Area 0 database summary
Type
Brd Rtr Count
AS Bdr Rtr Count
662 Open Shortest Path First (OSPFv2 and OSPFv3)
Count/Status
1
1
0
1
0
0
73
114085
0
5
180
planned and unplanned
Count/Status
2
2