Dell S4048–ON Configuration Manual page 291

Hide thumbs Also See for S4048–ON:

Table of Contents

Figure 31. PFC and ETS Applied to LAN, IPC, and SAN Priority Traffic

QoS Traffic Classification: The service-class dynamic dot1p command has been used in Global Configuration mode to map

ingress dot1p frames to the queues shown in the following table. For more information, refer to

The following describes the dot1p-priority class group assignment

dot1p Value in

Priority Group Assignment

the Incoming

QoS dot1p Traffic Classification and Queue

Data Center Bridging (DCB)

Troubleshooting