Dell S4048–ON Configuration Manual page 287

Port Role is Auto-Upstream
DCBx Operational Status is Enabled
Is Configuration Source? FALSE
Local DCBx Compatibility mode is CEE
Local DCBx Configured mode is CEE
Peer Operating version is CEE
Local DCBx TLVs Transmitted: ErPFi
Local DCBx Status
-----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Protocol State: In-Sync
Peer DCBx Status:
----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Total DCBx Frames transmitted 994
Total DCBx Frames received 646
Total DCBx Frame errors 0
Total DCBx Frames unrecognized 0
The following table describes the show interface DCBx detail command fields.
Table 23. show interface DCBx detail Command Description
Field
Interface
Port-Role
DCBx Operational Status
Configuration Source
Local DCBx Compatibility mode
Local DCBx Configured mode
Peer Operating version
Local DCBx TLVs Transmitted
Local DCBx Status: DCBx Operational Version
Local DCBx Status: DCBx Max Version Supported
Local DCBx Status: Sequence Number
Local DCBx Status: Acknowledgment Number
Description
Interface type with chassis slot and port number.
Configured DCBx port role: auto-upstream, auto-downstream,
config-source, or manual.
Operational status (enabled or disabled) used to elect a
configuration source and internally propagate a DCB configuration.
The DCBx operational status is the combination of PFC and ETS
operational status.
Specifies whether the port serves as the DCBx configuration
source on the switch: true (yes) or false (no).
DCBx version accepted in a DCB configuration as compatible. In
auto-upstream mode, a port can only received a DCBx version
supported on the remote peer.
DCBx version configured on the port: CEE, CIN, IEEE v2.5, or Auto
(port auto-configures to use the DCBx version received from a
peer).
DCBx version that the peer uses to exchange DCB parameters.
Transmission status (enabled or disabled) of advertised DCB TLVs
(see TLV code at the top of the show command output).
DCBx version advertised in Control TLVs.
Highest DCBx version supported in Control TLVs.
Sequence number transmitted in Control TLVs.
Acknowledgement number transmitted in Control TLVs.
Data Center Bridging (DCB) 287