Dell S4048–ON Configuration Manual page 897

Master priority
Hardware Rev
Num Ports
Up Time
Dell Networking OS Version : 1-0(0-5005)
Jumbo Capable
POE Capable
FIPS Mode
Burned In MAC
No Of MACs
-- Power Supplies
Unit Bay Status
---------------------------------------------------------------------------
2 1 up
2 2 down
-- Fan Status --
Unit Bay TrayStatus
------------------------------------------------------------------------------------
2 1 up
2 2 up
2 3 up
Speed in RPM
-- Unit 3 --
Unit Type
Status
Next Boot
Required Type
Current Type
Master priority
Hardware Rev
Num Ports
Up Time
Dell Networking OS Version : 1-0(0-5005)
Jumbo Capable
POE Capable
FIPS Mode
Burned In MAC
No Of MACs
-- Power Supplies
Unit Bay Status
---------------------------------------------------------------------------
3 1 up
3 2 absent
-- Fan Status --
Unit Bay TrayStatus
------------------------------------------------------------------------------------
3 1 up
3 2 up
3 3 up
Speed in RPM
Dell#
A change in the stack master occurs when:
• You power down the stack master or bring the master switch offline.
• A failover of the master switch occurs.
• You disconnect the master switch from the stack.
When a stack reloads and all the units come up at the same time; for example, when all units boot up from flash, all units participate in the
election and the master and standby are chosen based on the priority or MAC address.
: 10
: 2.0
: 72
: 33 min, 52 sec
: yes
: no
: disabled
: 34:17:eb:f2:83:c4
: 3
--
Type FanStatus
UNKNOWN up
UNKNOWN down
Fan1 Speed
up 10031
up 10031
up 10134
: Member Unit
: online
: online
: S4048-ON - 54-port TE/FG (SK-ON)
: S4048-ON - 54-port TE/FG (SK-ON)
: 5
: 2.0
: 72
: 33 min, 45 sec
: yes
: no
: disabled
: 34:17:eb:f2:99:c4
: 3
--
Type FanStatus
UNKNOWN up
absent
Fan1 Speed
up 10031
up 9929
up 10031
FanSpeed(rpm)
10768
0
Fan2 Speed
up 10031
up 10031
up 10031
FanSpeed(rpm)
10704
0
Fan2 Speed
up 10031
up 10031
up 10134
Stacking 897