Rack And Speed Dome Installation; Installation Requirements; Eptz3000 Dome Camera Wall Mount Installation - EverFocus Eptz3000 User Manual

Everfocus speed dome user manual

Hide thumbs Also See for Eptz3000:

Table of Contents

2.4. Rack and Speed Dome Installation

1. Installation should be handled by a qualified service agent and should comply with

all local regulations. Service personnel should expect potential problems such as

surface strength, surface material, falling objects, outer breaches, building vibration

or other similar conditions.

2. Check for all necessary materials, and ensure if the selected installation location is

suitable for the EPTZ3000/EPTZ3000I.

Note: Installation location that is a wall, a pole or a ceiling needs to support above five

times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and

dropping.

1. Set wall mount bracket on the wall. Mark the center of the holes on the wall against

the bracket holes. Use a drill to make 4 holes that can be nailed 4 0.25" X 1.25"

screws at the marks.

Note: The length of the screws depends on the surface material. The mentioned screws

are used in the normal concrete surface.

2-19

Table of Contents

Show Quick Links

Table of Contents

Eptz3000i