3.5.3 Wall-Mount Installation
1. Replace the desiccant bags inside the top housing. See 3.5.2.1 Replacing the Desiccant Bags.
2. Drill 4 screw-depth holes for mounting the bracket base plate and then drill a through-wall hole
for inserting the camera cables. You can optionally drill a second through-wall hole to separate
cable feeding (see Step 4).
3. Attach the waterproof silicon pad to the bracket base plate for waterproofing.
Waterproof
silicon pad
4. Feed the camera's cables through the conduit in the wall mount bracket.
Wall Mount Bracket
B
racket base plate
10
EPN Plus Series