CHARACTERISTICS
CHARACTERISTICS
Input characteristics
INPUT CONNECTOR
INPUT IMPEDANCE
(in 1 MQ pos.)
R parallel:
- value
- tolerance
C parallel:
- value
- tolerance
INPUT IMPEDANCE
(in 50 £2 pos.)
R parallel:
- value
- tolerance
VSWR (typical)
Note 1:
BNC with Probe Read Out Pin which causes the instrument to change V/div indication,
input impedance and attenuator setting according to probe (when fitted with a probe
indicator).
Note 2:
Measured up to 200 MHz input frequency; in d.c. and a.c. coupling of input.
Coupling
COUPLING
Note 1:
In GND position: channel disconnected from input, and connected to ground, BNC open
(when not in 50Q. position). The GND coupling is not available for CH3 and CH4 in
PM3092 and PM3082.
Dynamic range
DYNAMIC RANGE
Up to 25 MHz
(PM3082/84)
Up to 50 MHz
(PM3092/94)
Up to 100 MHz
(PM3082/84)
Up to 200 MHz
(PM3092/94)
Position range
POSITION RANGE
Trace separation
2.1.9
TRACE SEPARATION
Min. range
SPECIFICATION
BNC
1 MQ
±1 %
25 pF
±2 pF
50 Q
±1 %
1.5: 1
d.c.; a.c.; ground
±12 div
±12 div
±4 div
±4 div
±£8 div
>± 4 div
ADDITIONAL INFORMATION
See note 1
Measured at freq.
<1 MHz
PM3092 only CH1 and CH2.
PM3094 all channels
See note 2
See note 1
Symmetrical
Symmetrical
Symmetrical
Symmetrical
Symmetrical
MTB and DTB
MTB fixed, DTB shifts
2 - 3