Tools Needed - Graco LineLazer IV 250SPS Installation And Operation Manual

Tools Needed:

CE Safety Checklist
(To be completed during non-factory installation)
Covers and shrouds for moving parts are in place (see guard installation section).
Fasteners, belts, covers, grills, and compressor are tight-mounted securely.
Read and understand all warnings and instructions in this manual and the striper manual.
Tools Needed:
• 1/8 in. Allen Wrench (supplied with kit)
• Alignment tool 17C504 (supplied with kit)
• 5/32 in. Allen Wrench
• 1/4 in. Allen Wrench
• 3/16 in. Allen Wrench
• 7/16 in. Wrench
• 3/8 in. Wrench
• 1/2 in. Wrench
• 5/8 in. Wrench
• 9/16 in. Wrench
• 11/16 in. Wrench
• T-20 Torx Bit
• Cutting Blade
• Rubber Mallet
• Phillips Screwdriver
• Straight Edge
4 332230G