Configurable Parameters - SMA SUNNY SENSORBOX Installation Manual

Parameters
*
Anemometer
Name
WindVel m/s
WindVel km/h
WindVel mph
* If no anemometer is connected or the wind velocity exceeds the measurement range, "0" is displayed in these channels.
12.1.2 Configurable parameters
Name Description
DevNam device name
TmpUnit unit of temperature
WindUnit unit for wind velocity
DevRs Sunny SensorBox
reset
RS485DI response delay of the
Sunny SensorBox to
the RS485 bus;
this parameter is only
visible if you are
logged in as an
"installer" in the
communication device
78 Sensorbox-eng-IA-IUS-112515
Description
wind velocity in m/s
wind velocity in km/h
wind velocity in mph
Value / range
Text
°C
K
°F
m/s
km/h
mph
0 ms ... 255 ms for reset, enter "1" and save;
0 ms ... 1.000 ms if you are using a Sunny Boy
Explanation
allocation of a user-defined
device name
degrees Celsius
Kelvin
degrees Fahrenheit
the specified parameter will
not be added and the LED in
the Sunny SensorBox remains
off for 60 seconds
Control/Plus, this parameter
must be set to "200 ms"; if
you are using a Sunny
WebBox, the response delay
can be reduced to "10 ms".
SMA America, LLC
Default
value
°C
m/s
0
200 ms
Installation Manual