Determining The Mounting/Installation Location - SMA SUNNY SENSORBOX Installation Manual

Mounting the device
6.4.3 Determining the mounting/installation location
Before mounting the SMA Power Injector with Bluetooth, you must first test the wireless connection
between the device and your PV system at the specified mounting/installation location. The Sunny
SensorBox does not have to be connected to the SMA Power Injector with Bluetooth in order to
perform this test.
1. Turn the "MODE" rotary switch of the
SMA Power Injector with Bluetooth to position "3".
The sole purpose of this position is to determine the
location of installation.
"MODE" ID Meaning
0 normal operation
1 for servicing purposes
only
2 for servicing purposes
only
3 installation mode
2. Turn the "NetID" rotary switch of the SMA Power
Injector with Bluetooth to the NetID of your PV
system. If your PV system does not have a NetID
yet, see section 6.4.2 "Information on SMA
Bluetooth" (page 35).
36 Sensorbox-eng-IA-IUS-112515
SMA America, LLC
Installation Manual