Sma Power Injector With Bluetooth; Requirements For The Mounting Location - SMA SUNNY SENSORBOX Installation Manual

Mounting the device
5. Slide the RS485 Power Injector onto the wall mounting bracket as shown in steps ① - ③ .
☑ The RS485 Power Injector is mounted on the wall.
6.4 SMA Power Injector with Bluetooth
6.4.1 Requirements for the mounting location
Observe the following requirements regarding the mounting location of the SMA Power Injector with
Bluetooth:
• The SMA Power Injector with Bluetooth is intended for indoor installation only.
• The mounting location must be in the vicinity of a 100 V ... 240 V socket (plug-in power supply
cable length 6 ft. (1,800 mm)).
• Protect the SMA Power Injector with Bluetooth from dust, moisture and corrosive substances.
• The ambient temperature must remain between − 13 °F and 149 °F ( − 20 °C and + 65 °C).
• The maximum cable length from the Sunny SensorBox to the SMA Power Injector with Bluetooth
is 490 ft. (150 m).
• The maximum cable length for the alternate power supply device is 33 ft. (10 m).
• The wireless link at the mounting location must have a connection quality rating of "good" or
higher (see section 6.4.3 "Determining the mounting/installation location" (page 36).
34 Sensorbox-eng-IA-IUS-112515
SMA America, LLC
Installation Manual