Mounting The Sma Power Injector With Bluetooth On A Wall - SMA SUNNY SENSORBOX Installation Manual

Mounting the device
6.4.4 Mounting the SMA Power Injector with Bluetooth on a wall
Included mounting accessories
Position Quantity Designation
A 1
B 1
C 1
*
Can be found on the back of the SMA Power Injector with Bluetooth on delivery.
1. Remove the bracket from the back of the SMA
Power Injector with Bluetooth.
2. The mounting location must be determined based on the space available and the quality of the
wireless connection to the Bluetooth network.
3. Label the drill hole.
1
4. Drill a ⁄ in. (6 mm) diameter hole at the designated point and insert a wall anchor.
4
5. Fasten the bracket to the wall with a screw.
38 Sensorbox-eng-IA-IUS-112515
*
Bracket
Screw
Wall anchor
SMA America, LLC
Installation Manual