SMA SUNNY SENSORBOX Installation Manual page 53

SMA America, LLC
17. Thread the RS485 communication cable through
the lock nut and the cable gland into the enclosure
of the Sunny SensorBox.
5
18. Remove 1 ⁄ in. (40 mm) of cable sleeve from the
8
RS485 communication cable that is connected to
the Sunny SensorBox.
1
19. Strip ⁄ in. (6 mm) of insulation from the wires.
4
20. Twist the cable shield into one string. The cable
shield is only needed if another Sunny SensorBox is
connected.
21. Pull the insulating tube over the cable shield. Allow 1
out of the insulating tube.
22. Insert the detached cable shield into the terminal.
Installation Manual
5
⁄ in. (40 mm) of the cable shield to stick
8
Sensorbox-eng-IA-IUS-112515
Startup
53