Rs485 Power Injector; Requirements For The Mounting Location; Mounting The Rs485 Power Injector On A Wall - SMA SUNNY SENSORBOX Installation Manual

Mounting the device
6.3 RS485 Power Injector
6.3.1 Requirements for the mounting location
Observe the following requirements regarding the mounting location of the RS485 Power Injector:
• The RS485 Power Injector is intended for indoor installation only.
• The mounting location must be in the vicinity of a 100 V ... 240 V socket (power supply cable
length 6 ft. (1,800 mm)).
• Protect the RS485 Power Injector from dust, moisture and corrosive substances.
• The ambient temperature must remain between − 13 °F and +149 °F ( − 20 °C and + 65 °C).
• The maximum cable length from the final Sunny SensorBox to the RS485 Power Injector is
490 ft. (150 m).
• The maximum cable length of the entire RS485 communication bus is 3,900 ft. (1,200 m).
6.3.2 Mounting the RS485 Power Injector on a wall
Included mounting accessories
Only with Sunny SensorBox order option: SUNNYSENSOR-1xxxx
Position Quantity Designation
A 1
B 2
C 2
32 Sensorbox-eng-IA-IUS-112515
Wall mounting bracket
Screws
Wall anchors
SMA America, LLC
Installation Manual