Startup Via The Sma Power Injector With Bluetooth; Information On Starting Up The Device; Grounding The Sunny Sensorbox - SMA SUNNY SENSORBOX Installation Manual

Startup
7.6 Startup via the SMA Power Injector with Bluetooth
7.6.1 Information on starting up the device
The Sunny SensorBox is integrated into the SMA Bluetooth network via the SMA Power Injector with
Bluetooth. The SMA Power Injector with Bluetooth is designed to supply power to one Sunny
SensorBox only.
To connect the Sunny SensorBox to the SMA Power Injector with Bluetooth, proceed as follows:
① Gound the Sunny SensorBox (see page 58).
② Connect the SMA Power Injector with Bluetooth to the Sunny SensorBox (see page 60).
③ Connect the SMA Power Injector with Bluetooth to the power supply (see page 63).
7.6.2 Grounding the Sunny SensorBox
Sunny SensorBox
1. Open the Sunny SensorBox (see page 66).
2. Unscrew the lock nut of the cable gland at the bottom center of the Sunny SensorBox and
remove the filler plugs.
3. Thread the ground cable through the lock nut and
the cable gland into the Sunny SensorBox
enclosure.
58 Sensorbox-eng-IA-IUS-112515
SMA America, LLC
Installation Manual