Mounting The Temperature Sensor On The Pv Module - SMA SUNNY SENSORBOX Installation Manual

Mounting the device
5. Using the notches as a guide, open the side flaps of
the Sunny SensorBox.
6. Fasten the Sunny SensorBox onto the mounting
bracket with four hexagonal screws. Make sure the
Sunny SensorBox is oriented correctly (see page 24).
7. Grind down the roof tiles if necessary.
8. Put the roof tiles back on the roof.
☑ The Sunny SensorBox is now mounted on the rafter.
6.2 Mounting the temperature sensor on the PV module
Requirements for the mounting location
Observe the following requirements regarding the mounting location of the module temperature
sensor:
• Select a PV module that remains unshaded throughout the day.
• Do not attempt to extend or shorten the pre-assembled 8 ft. (2.5 m) cable.
• The module temperature sensor is affixed to the back of the PV module.
Included mounting accessories
Position Quantity Designation
A 1
B 1
C 2
30 Sensorbox-eng-IA-IUS-112515
PT100 module temperature sensor with 8 ft. (2.5 m) connection cable
Thermally conductive adhesive (protective gloves, hardener and binder) with
instructions and packaging
Adhesive strips
SMA America, LLC
Installation Manual