Toolbar; Common Commands - Omron MX2 Series User Manual

Drive Programming

3-3 Toolbar

The Program Editor window contains the following commands:

3-3-1 Common Commands

Commands
New task (Flowchart)
New Task (Text)
New Subroutine
(Flowchart)
New Subroutine
(Text)
Rename Current
Task/Subroutine
Delete Current Tab
Undo
Redo
Transfer to Drive
Transfer from Drive
Start
Stop
Compile
Password
Help
Image
It allows creating a new Flowchart task for the program, up to the
maximum number of tasks allowed. Tasks are parts of the
program which are executed independently of each other.
It allows creating a new Text task for the program, up to the
maximum number of tasks allowed. Tasks are parts of the
program which are executed independently of each other.
It allows creating a new Flowchart subroutine. A subroutine is a
part of the program which is called from a task.
It allows creating a new Text subroutine. A subroutine is a part of
the program which is called from a task.
It allows to rename the current task/subroutine.
It deletes the current Task or Subroutine.
It reverts the latest change.
It recovers the most recently undone change.
It compiles the program and, if there are no errors, transfer it to the
drive.
It transfers the program from the drive to the Program Editor.
It starts the program in the drive. CX-Drive will first compare it with
the program currently being edited, to make sure that they are the
same. If they differ, the program will not be started.
It stops the program in the drive. This action is done regardless of
whether the program in the drive is the same that in the program
designer.
It compiles the program which is currently being designed.
Compile errors and warnings will be reported as tool tips in the
blocks in the flowchart.
It allows you to set, change or remove the program password.
It displays the Drive Programming help.
Description
10