Drive Programming
Command
Subtracts <value 2> from <value 1>.
<result>= <value 1> - <value 2>
Warning: Drive Programming does not control overflow/underflow. The application should take care.
Example
Flowchart
The P102 parameter calculation result is 300.
Command
Multiplies <value 1> by <value 2>.
<result> = <value 1> * <value 2>
Warning: Drive Programming does not control overflow/underflow. The application should take care.
Example
Flowchart
The P102 parameter is set to 1000.
- (Subtraction)
Description
Format
*(Multiplication)
Description
Format
Arguments
• Result: any variable.
• Value 1: any variable or constant (range
-128 to 127).
• Value 2: any variable or constant (range
-2147483648 to 2147483647).
Text
Arguments
• Result: any variable.
• Value 1: any variable or constant (range
-128 to 127).
• Value 2: any variable or constant (range
-2147483648 to 2147483647).
Text
48