Installing And Replacing An Ssd; Installing The Optional Sata Solid State Drive In A Qfx10000 - Juniper QFX10016 Hardware Manual

CHAPTER 21

Installing and Replacing an SSD

Installing the Optional SATA Solid State Drive in a QFX10000

Copyright © 2017, Juniper Networks, Inc.
Installing the Optional SATA Solid State Drive in a QFX10000 on page 245
Removing the Optional SATA Solid State Drive in a QFX10000 on page 247
The QFX100000 allows optional installation of either a 50 GB or a 100 GB serial advanced
technology attachment (SATA) solid state drive (SSD) as a secondary boot drive or for
log storage. The SATA SSD is a hot-insertable and hot-removable field-replaceable unit
(FRU).
Before you install an SATA SSD in the switch, ensure you that understand how to prevent
ESD damage. See "Prevention of Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available to install an SATA SSD in a
QFX10000:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
327.
245