Qfx10000 Ac Power Specifications; Table 49: Power Specifications For An Ac Power Supply Used In A; Table 50: Physical Specifications For A Qfx10000 Ac Power Supply - Juniper QFX10016 Hardware Manual

Related
Documentation

QFX10000 AC Power Specifications

Table 49: Power Specifications for an AC Power Supply Used in a QFX10000
Item
AC input voltage
AC input line frequency
AC input current rating
AC output power

Table 50: Physical Specifications for a QFX10000 AC Power Supply

Specification
Height
Width
Depth
Weight
Copyright © 2017, Juniper Networks, Inc.
NOTE: We recommend that you maintain N +1 power supplies in your switch
at all times. Replace failed power supplies immediately to prevent unexpected
failures.
If a new line card is installed in an operational switch, power management
does not power on the line card if the increased power demand exceeds the
total available power, including redundant power. If redundant power is used
to power on the line card, a minor alarm is raised, which becomes a major
alarm in five minutes if the condition is not corrected.
QFX10000 AC Power Supply on page 43
QFX10000 DC Power Supply on page 46
Power Requirements for QFX10000 Components on page 113
QFX10008 and QFX10016 redundant configuration switches can use either AC or DC
power supplies; base configuration switches are AC only.
Table 49 on page 119 lists the power specifications for the AC power supply used in a
QFX10000 modular chassis.
Table 50 on page 119 shows the physical specifications for an AC power supply.
Value
3.5 in. (1.59 cm)
3.6 in. (1.63 cm)
14.4 in. (6.53 cm)
6.4 lbs. (2.72 kg)
Chapter 9: Power Specifications and Requirements
Specifications
Operating range: 200–240 VAC
50–60 Hz
16 A
2700 W
119