Chapter 1: Access Point Overview - Enterasys RoamAbout RBT-1602 Installation Manual

For information about...
External Hardware Features
Connection Options
An Enterasys Networks RoamAbout Access Point (AP) provides IEEE 802.11 wireless access to the
network. The access points are designed for use with an Enterasys Networks RoamAbout switch.
Access Points require hardware installation only. All configuration for an access point takes place
on the switch.
This guide describes the RBT‐1602 and the RBT‐1602C Access Points. The access point has one
802.11a radio and one 802.11b/g radio. Both radios have internal diversity omnidirectional
antennas. In addition, both radios have separate jacks for attachment of optional external
sectorized or directional antennas. The antennas must be ordered separately.
Go to www.enterasys.com to ensure that you have the latest Regulatory information
Warning: Installation must be performed by qualified service personnel only. Read and follow all
warning notices and instructions marked on the product or included in the documentation. Before
installing the product, read the Regulatory Information document. (For translations of this warning,
Appendix C
see
Note: The AP radios are disabled by default and can be enabled only by a system administrator
using the switch.
Access Point Overview
.)
RBT-1602 and RBT-1602C Wireless Access Point Installation Guide 1-1
1
Refer to page...
1-2
1-4