Installation Requirements And Recommendations; Rasm Network Plan And Work Orders; Shipping Carton Contents - Enterasys RoamAbout RBT-1602 Installation Manual

Installation Requirements and Recommendations

Figure 2-1
Before you begin installation:
1. Open the carton and carefully remove the contents, if you have not already done so.
2. Place the packing materials back in the carton, and save the carton.
3. Verify that you received each item in the previous list. If any item is missing or damaged,
contact Enterasys Networks.
Installation Requirements and Recommendations
For best results, follow these requirements and recommendations before installing a RoamAbout
Access Point.

RASM Network Plan and Work Orders

If you are using RASM to plan your Enterasys Networks Mobility System installation, you might
want to create and verify a network plan for the entire Enterasys network installation and generate
an AP work order, before installing APs. A network plan and the AP work orders generated from
it provide the following information about AP installation and configuration:
• Number of APs required for adequate WLAN capacity in each coverage area
• Detailed installation location for each AP
• Settings for all APs in the WLAN
For information about installing RASM, creating and verifying a network plan, and generating an
AP work order, refer to the Enterasys RoamAbout Switch Manager User's Guide and the Enterasys
RoamAbout Switch Manager Interface Reference Guide.
2-2 Installing and Connecting the Access Point

Shipping Carton Contents

Mobility point
T-bar clamps
Mounting template
Universal
Rubber feet
mounting bracket
Mounting hardware