INSTALLATION INSTRUCTIONS
1-6.7.2
Prepare the FACL
Refer to Figure 1-27 and Figure 1-28 during performance of this procedure.
STEP
ACTION
1
Remove the two screws from each of the covers.
2
Pull up on the two top cover halves and remove.
3
Pull the two cables, CNJ24 and CNJ28, through the square hole on the lower right rear of the
FACL. See Figure 1-28 for location.
1-34
Figure 1-27. Prepare the FACL
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
April 1997