INSTALLATION INSTRUCTIONS
1-6.6.2
Prepare the ACL
Refer to Figure 1-21 during performance of this procedure.
STEP
ACTION
1
Remove two screws (on the bottom front corners) from the ACL top cover.
2
Push down and hold the cover release bar while pulling up and slightly moving the top cover for-
ward. When the cover has cleared the hook on the top rear of the cover (behind the cover
release), continue to pull forward then up.
3
Remove the four screws from the bottom of the ACL and gently lift the ACL mechanism from
the base.
1-28
Bar
Figure 1-21. Prepare the ACL
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
April 1997