Fujitsu M2488 Product Manual page 477

M2488 PRODUCT GUIDE
Table F-24. Routine 83 - Operator Control Panel Diagnostic Error Codes (Continued)
ROUTINE TEST
0x01 Operator Control Panel keys test
0x83
0x83 0x02 Operator Control Panel display
test
0x83 0x03 Operator Control Panel tape LED
test
0x83 0x04 Operator Control Panel drive LED
test
April 1997
ERROR
TITLE
CODE
0x06
0x07
0x08
0x09
0x0A
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x01
0x01
0x02
CG00000-011503 REV. A
DIAGNOSTIC TESTS AND ERROR CODES
DESCRIPTION
START switch release not detected in allotted
time.
TEST switch press not detected in allotted
time.
TEST switch release not detected in allotted
time.
SHIFT switch press not detected in allotted
time.
SHIFT switch release not detected in allotted
time.
Scrolling message not acknowledged within
allotted time.
General message, first half not acknowledged
within allotted time.
General message, flash first half not acknowl-
edged within allotted time.
General message, last half not acknowledged
within allotted time.
General message, flash last half not acknowl-
edged within allotted time.
General message, alternating first/last half not
acknowledged within allotted time.
Blinking character message not acknowl-
edged within allotted time.
Correct tape position LED sequence not
acknowledged within allotted time.
Correct operation of SELECT LED not
acknowledged within allotted time.
Correct operation of COMPRESSION LED
not acknowledged within allotted time.
F-77