4-3.17.4 Read Position Sense Keys - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
4-3.17.4 READ POSITION Sense Keys
One of the following sense keys may be returned if a CHECK CONDITION was indicated:
SENSE KEY CONDITION
5h ILLEGAL REQUEST
6h UNIT ATTENTION
Bh ABORTED COMMAND
April 1997
1. Reserved bit was found set in the CDB of the READ POSI-
TION command.
2. The Flag bit was set but the Link bit was not set.
Indicates the READ POSITION command was not performed due
to one of the following:
1. The tape cartridge may have been changed.
2. The target has been reset.
3. The Mode parameters have been changed by another initiator.
4. The version of the microcode has been changed (microcode
downloaded).
5. A cartridge was loaded with a tape length that is too long or too
short.
READ POSITION command was aborted. The READ POSI-
TION command can be reissued.
CG00000-011503 REV. A
TAPE UNIT SCSI COMMANDS
DESCRIPTION
4-79