Fujitsu M2488 Product Manual page 246

TAPE UNIT PARAMETERS
Table 5-11. Page 0Ah - Common Device-type Control Parameters Field Description (Continued)
BYTE BIT VALUE
4 0-2
4 7
6-7
5-10
0 The RAENP, UAAENP, and EAENP bits enable specific events to be reported via
the asynchronous event notification protocol. This product does not support asyn-
chronous event notification.
When all three bits are zero, the target shall not create asynchronous event notifica-
tions.
The default values reported for these fields on a MODE SENSE command are zeros
and not changeable.
0 When set to zero, the Enable Extended Contingent Allegiance (EECA) bit indicates
that the extension of the contingent allegiance condition is disabled.
The default value reported for this field on a MODE SENSE command is zero and
not changeable.
0 The Ready AEN Holdoff Period field specifies the minimum time in microseconds
after the target starts its initialization sequence that it shall delay before attempting
to issue an asynchronous event notification.
The default value reported for this field on a MODE SENSE command is zero and
not changeable.
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
DESCRIPTION
April 1997