HP VSR1000 Security Configuration Manual page 94

e. Enter the key, which must be the same as that configured on the router.
f. Select Directly Connected from the Access Method list.
g. Select whether to support sever heartbeat and user heartbeat functions.
In this example, select No for both Support Server Heartbeat and Support User Heartbeat.
h. Click OK.
Figure 25 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure
column of device NAS to enter the port group configuration page.
b. Click Add to enter the page shown in
c. Enter the port group name.
d. Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address group.
e. Use the default settings for other parameters.
f. Click OK.
Figure 26 Device list
26, click the Port Group Information Management icon in the Operation
Figure
84
27.