HP VSR1000 Security Configuration Manual page 104

Figure 30 Network diagram
Host
2.2.2.2/24
Gateway : 2.2.2.1/24
Configuration prerequisites
Configure IP addresses for the host, router, and servers as shown in
•
can reach each other.
Configure the RADIUS server correctly to provide authentication and accounting functions.
•
Configuration procedure
Perform the following configurations on the router.
1. Configure a RADIUS scheme:
# Create a RADIUS scheme named rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[Router-radius-rs1] primary authentication 192.168.0.112
[Router-radius-rs1] primary accounting 192.168.0.112
[Router-radius-rs1] key accounting simple radius
[Router-radius-rs1] key authentication simple radius
[Router-radius-rs1] user-name-format without-domain
# Specify the security policy server.
[Router-radius-rs1] security-policy-server 192.168.0.113
[Router-radius-rs1] quit
# Enable RADIUS session control.
[Router] radius session-control enable
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[Router] domain dm1
# Configure AAA methods for the ISP domain.
[Router-isp-dm1] authentication portal radius-scheme rs1
[Router-isp-dm1] authorization portal radius-scheme rs1
[Router-isp-dm1] accounting portal radius-scheme rs1
GE2/0
GE1/0
2.2.2.1/24
192.168.0.100/24
Router
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
Security policy server
192.168.0.113/24
94
Figure 30 and make sure they