Examples Of Public Key Management; Example For Entering A Peer Public Key - HP VSR1000 Security Configuration Manual

Task
Display local public keys.
Display peer public keys.

Examples of public key management

Example for entering a peer public key

Network requirements
As shown in
signature. Before configuring authentication parameters on Device B, configure the public key of Device
A on Device B.
• Configure Device B to use the asymmetric key algorithm of RSA to authenticate Device A.
Manually specify the host public key of Device A on Device B.
•
Figure 40 Network diagram
Configuration procedure
1. Configure Device A:
# Create local RSA key pairs with default names on Device A, and use the default modulus length
1024 bits.
<DeviceA> system-view
[DeviceA] public-key local create rsa
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
.................++++++
......................................++++++
.....++++++++
..............++++++++
Create the key pair successfully.
# Display all local RSA public keys.
[DeviceA] display public-key local rsa public
=============================================
Key name: hostkey (default)
Key type: RSA
Time when key pair created: 16:48:31 2013/05/12
Key code:
Figure 40, to prevent illegal access, Device B authenticates Device A through a digital
Command
display public-key local { dsa | rsa } public [ name key-name ]
display public-key peer [ brief | name publickey-name ] [ name
key-name ]
128