HP VSR1000 Security Configuration Manual page 238

Connection-ID
------------------------------------------------------------------
1
Flags:
RD--READY RL--REPLACED FD-FADING
# Display the IPsec SAs generated on Device A.
[DeviceA] display ipsec sa
-------------------------------
Interface: GigabitEthernet1/0
-------------------------------
-----------------------------
IPsec policy: map1
Sequence number: 10
Mode: isakmp
-----------------------------
Tunnel id: 0
Encapsulation mode: tunnel
Perfect forward secrecy:
Path MTU: 1456
Tunnel:
local address: 1.1.1.1
remote address: 2.2.2.2
Flow:
sour addr: 10.1.1.0/255.255.255.0
dest addr: 10.1.2.0/255.255.255.0
[Inbound ESP SAs]
SPI: 3264152513 (0xc28f03c1)
Transform set: ESP-ENCRYPT-AES-CBC-128 ESP-AUTH-SHA1
SA duration (kilobytes/sec): 1843200/3600
SA remaining duration (kilobytes/sec): 1843200/3484
Max received sequence-number:
Anti-replay check enable: Y
Anti-replay window size: 64
UDP encapsulation used for NAT traversal: N
Status: active
[Outbound ESP SAs]
SPI: 738451674 (0x2c03e0da)
Transform set: ESP-ENCRYPT-AES-CBC-128 ESP-AUTH-SHA1
SA duration (kilobytes/sec): 1843200/3600
SA remaining duration (kilobytes/sec): 1843200/3484
Max received sequence-number:
Anti-replay check enable: Y
Anti-replay window size: 64
UDP encapsulation used for NAT traversal: N
Status: active
Remote
2.2.2.2
228
Flag DOI
RD IPSEC
port: 0 protocol: IP
port: 0 protocol: IP