HP VSR1000 Security Configuration Manual page 274

Figure 67 Network diagram
Configuration procedure
In the server configuration, the client's host public key is required. Use the client software to generate RSA
key pairs on the client before configuring the Stelnet server.
There are different types of Stelnet client software, such as PuTTY and OpenSSH. This example uses an
Stelnet client that runs PuTTY version 0.58.
The configuration procedure is as follows:
1. Generate the RSA key pairs on the Stelnet client:
a. Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 68 Generating a key pair on the client
b. Continuously move the mouse and do not place the mouse over the green progress bar shown
in Figure
stops.
69. Otherwise, the progress bar stops moving and the key pair generating process
264