HP VSR1000 Security Configuration Manual page 45

Step
3. Specify HWTACACS
authentication servers.
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and up to 16 secondary authorization servers for an
HWTACACS scheme. When the primary server is not available, the device searches for the secondary
servers in the order they are configured. The first secondary server in active state is used for
communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as the
primary authorization server of one scheme and as the secondary authorization server of another
scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Specifying the HWTACACS accounting servers
You can specify one primary accounting server and up to 16 secondary accounting servers for an
HWTACACS scheme. When the primary server is not available, the device searches for the secondary
servers in the order they are configured. The first secondary server in active state is used for
communication.
Command
•
Specify the primary HWTACACS
authentication server:
primary authentication { ipv4-address
| ipv6 ipv6-address } [ port-number |
key { cipher | simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher | simple }
string | single-connection |
vpn-instance vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection |
vpn-instance vpn-instance-name ] *
•
Specify a secondary HWTACACS
authorization server:
secondary authorization
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | single-connection |
vpn-instance vpn-instance-name ] *
35
Remarks
Configure at least one command.
By default, no authentication
server is specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.
Remarks
N/A
N/A
Configure at least one command.
By default, no authorization server
is specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN.