Configuring The Device As An Sftp Client; Sftp Client Configuration Task List; Specifying A Source Ip Address For Sftp Packets; Establishing A Connection To An Sftp Server - HP VSR1000 Security Configuration Manual

Virtual services router
Table of Contents

Advertisement

Configuring the device as an SFTP client

SFTP client configuration task list

Tasks at a glance
(Optional.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Specifying a source IP address for SFTP packets

HP recommends that you specify the IP address of the loopback or dialer interface as the source address
for SFTP packets for the following purposes:
Ensuring the communication between the SFTP client and the Stelnet server.
Improving the manageability of SFTP clients in authentication service.
To specify a source IP address for SFTP packets:
Step
1.
Enter system view.
Specify a source address
2.
for SFTP packets.

Establishing a connection to an SFTP server

When you try to access an SFTP server, the device must use the server's host public key to authenticate
the server. If the server's host public key is not configured on the device, the device will prompt you to
confirm whether to continue with the access.
If you choose to continue, the device accesses the server and downloads the server's host public
key.
If you choose to not continue, the connection cannot be established.
Specifying a source IP address for SFTP packets
Establishing a connection to an SFTP server
Working with SFTP directories
Working with SFTP files
Displaying help information
Terminating the connection with the SFTP server
Command
system-view
Specify a source IPv4 address for
SFTP packets:
sftp client source { ip ip-address |
interface interface-type
interface-number }
Specify a source IPv6 address for
SFTP packets:
sftp client ipv6 source { ipv6
ipv6-address | interface
interface-type interface-number }
256
Remarks
N/A
By default, the source IP address
for SFTP packets is not configured.
The SFTP packets use the IP
address of the output interface
specified in the routing entry as
their source IP address.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents