Configuring Ldap Schemes - HP VSR1000 Security Configuration Manual

Task
Display the configuration or server
statistics of HWTACACS schemes.
Clear HWTACACS statistics.

Configuring LDAP schemes

Configuration task list
Tasks at a glance
Configuring an LDAP server:
•
(Required.)
•
(Required.)
•
(Optional.)
•
(Optional.)
•
(Required.)
•
(Required.)
(Required.)
(Required.)
(Optional.)
Creating an LDAP server
Step
1. Enter system view.
2. Create an LDAP server and
enter LDAP server view.
Configuring the IP address of the LDAP server
Step
1. Enter system view.
2. Enter LDAP server view.
3. Configure the IP address of
the LDAP server.
Specifying the LDAP version
Specify the LDAP version on the NAS. The device supports LDAPv2 and LDAPv3, and the LDAP version
specified on the device must be consistent with the version specified on the LDAP server.
Creating an LDAP server
Configuring the IP address of the LDAP server
Specifying the LDAP version
Setting the LDAP server timeout period
Configuring administrator attributes
Configuring LDAP user attributes
Creating an LDAP scheme
Specifying the LDAP authentication server
Displaying and maintaining LDAP
Command
system-view
ldap server server-name
Command
display hwtacacs scheme [ hwtacacs-server-name [ statistics ]
reset hwtacacs statistics { accounting | all | authentication |
authorization }
Command
System-view
ldap server server-name
{ ip ip-address | ipv6
ipv6-address } [ port port-number ]
[ vpn-instance vpn-instance-name ]
40
Remarks
N/A
By default, no LDAP server exists.
Remarks
N/A
N/A
By default, an LDAP server has no
IP address.
You can configure either an IPv4
address or an IPv6 address for an
LDAP server. The most recent
configuration takes effect.